Printer
Questions related to the DNP DS40.
If you are unhappy with the color palette of your prints, then you can download a new ICC profile.
Please read this article on how to install a...
Wed, Jul 20, 2016 at 1:52 PM
\This is a surprisingly simple fix. Just grab some thin scotch tape. Use as thin of a tape as you can and make sure that the edges align. You want to tric...
Wed, Jul 20, 2016 at 1:51 PM
ONLY ATTEMPT THIS AS A LAST RESORT AT AN EVENT. If you have the time, it would be much easier and safer to call Imaging Spectrum (800-342-9294) and hav...
Wed, Jul 20, 2016 at 1:50 PM
If you just purchased a photobooth with a DNP DS620A printer, then it may not be selected as the default printer. Please do the following steps in orde...
Wed, Jul 20, 2016 at 1:53 PM
There is only a 2MM gap between the door and the ground. Make sure that the ground the printer is laying on is flat and even. If you are on a flat surf...
Tue, Jul 19, 2016 at 10:40 AM
Check out this link to learn how to empty your printer queue/spool: https://www.maketecheasier.com/clear-the-printer-queue-windows-8/
Wed, Jul 20, 2016 at 1:53 PM
If it says the ribbon end and you just inserted a brand new roll, then there might be an issue with the chip inside and you will need to contact the resel...
Wed, Jul 20, 2016 at 1:52 PM
See below for 2 quick troubleshooting tips if you notice an unwanted white border along the edges of your prints.
First, confirm that your b...
Wed, Jul 20, 2016 at 1:54 PM