1. CAMERA DIAL ON M (MANUAL)
2. ZOOM LENS TO 24MM
3. LENS TO AF AND STABILIZER OFF
4. TURN CAMERA ON (NOT VIDEO)
SHUTTER SPEED: 1/200s
APERTURE: 9.0 - 11.0
ISO: 400
IMAGE QUALITY: S2
WHITE BALANCE: SHADE
PICTURE STYLE: NEUTRAL
AUTO POWER OFF: DISABLE
----------------
ERRORS IF SETTINGS ARE NOT CORRECT (Assuming you are on Manual Mode)
SHUTTER SPEED
Shutter speed too low: The image will appear too bright if the shutter speed is low. Ambient lighting will also show. Blurring will appear around subjects.
Shutter speed too high: There will be a black bar across the image or it will be completely black. This is because the maximum sync speed is 1/200s. Anything faster and the shutter will cut off the image while it's flashing, hence the black bar.
Shutter on BULB: The camera will begin to take the picture, but never finish. You'll hear only one click instead of the two clicks that the camera makes. This will freeze the computer.
APERTURE
Aperture too high: The image will appear too dark
Aperture too low: The image will appear too bright
ISO
ISO too high: The image will appear too dark
ISO too low: The image will appear too bright
IMAGE QUALITY
Image quality set too high: Social booth will take much longer to load
Image quality set too low: Images will be too low resolution to print
Image quality set to RAW: Social booth does not support RAW shooting
WHITE BALANCE
White balance set to anything else: The overall color of the image will differ
PICTURE STYLE
Picture style set to anything else: The prints will appear over or understated in color.
AUTO POWER OFF
If not set to auto power off, then the program will freeze because the camera disconnects.