1) In DSLR Remote Pro, go to File -> Photobooth Settings

2) Click “LOAD” on the bottom left



3) A new window will open up, visit the “Prompts” folder on your desktop and click on “VerticalProfile.xmp” This will change your print settings to have six photos in strips.




4) In Breeze DSLR Remote Pro, go to File -> Printer Setup -> Properties -> Layout (on top) -> Advanced… -> and then Enable 2inch cut which should be the last option below.



5. Make sure you hit "OK" and save all the settings. Unfortunately you will need to do this printer section every single time you want to print 2x6 prints as it will reset after you close the program.

6. If you want to convert back to your old 4x6 setting, in Breeze DSLR Remote Pro, go to File -> Photobooth Settings -> Load -> Click on the "Prompts" folder on your desktop -> Click "OriginalProfile.xml”


Here are a couple templates that you can work off of:


https://www.dropbox.com/s/iuef3hvnt1g2s9x/verticalclassic.psd

https://www.dropbox.com/s/1gpl2wrgbi0fop0/verticalmodern.psd


Tip: Breeze DSLR Remote Pro needs to have the layout flipped 90 Degrees Counter Clock Wise in order to print correctly. You can either do this in photoshop by going to Image -> Image Rotation -> 90 CCW. You can also do this by opening up the .jpg version of the layout you designed. Right click the image -> Open With -> Windows Photo Viewer -> On the bottom click the left rotate button and then just close it. It will save horizontally.